Natural stain-resistant fabrics

Combining the qualities of a natural fabric with the practicality of a stain-resistant fabric? Thanks to nanotechnology, it is possible.

The nanotechnological treatment consists of a special bath that makes the fabric stain-resistant while maintaining its colour, softness and brightness. It is not a surface coating, but acts deep inside the fibres of the yarn.

 

The convenience of water repellency for long-lasting beautiful fabrics

This makes the fabric easy to keep clean and beautiful over time. All it takes is a few simple steps, as you can see in the video: just gently dab the fabric with a sponge or blotting paper to prevent the stain from forming.

And together with the labels of our products with nanotechnological treatment we provide an information label: NAturallly TECHnologic – the fabric that learns from nature. The treatment is natural and permanent, because it acts on the fibre characteristics of the yarn (and is not a surface coating).

tag with writing and photo on blue houndstooth fabric
The tag that tells how the lotus effect works on fabrics

The fabric becomes stain-resistant and water-repellent, while also retaining the qualities we value in natural fabrics – i.e. it remains antistatic, breathable and non-toxic.

Stain-resistant is available for all fabrics

The nanotechnological treatment that makes fabrics stain-resistant is available on all the articles in the catalogue.

Our production is characterised in particular by the use of natural fibres: cotton, linen and wool. And it is on these types of yarns that nanotechnology is at its best; because the fabrics retain their natural qualities, and in addition there is the practicality of stain protection.

composition of six sofa fabrics in soft colours folded and overlapped
Some fabrics with natural yarns and anti-stain treatment

Nanotechnological treatment for stain-resistant fabrics that retain the qualities of natural fibres is not exclusive to large quantities. In our cutting fabric catalogue, articles with stain-resistant treatment are also available in small quantities.

We have especially in mind craftsmen and upholsterers, who may be working on individual pieces, but who certainly want to offer their customers the best fabrics in terms of both aesthetics and technical characteristics.

rolls of upholstery fabrics on shelves
Some rolls of stain-resistant fabrics available in cut-length

If you would like to know about the availability of nanotechnological stain-resistant cut-lenght fabrics, detailed information and samples, please contact our offices: we are at your disposal.

 

Floral printed fabric

Printed upholstery fabrics occupy a special place in our production. The creation of a printed fabric follows its own design and production lines, involving both internal and external expertise; and of course the possibilities for customisation are endless, or almost. Among all the patterns developed over the years and available in the catalogue, we propose a timeless floral printed fabric.

Detail of printed fabric with patterned flowers and leaves
An example of a floral printed fabric

A classic and timeless subject

This floral fabric is an example of our printed cottons. On a 100% pure cotton base, we have a pattern with a classic and timeless subject: flowers and leaves. Spring inspiration is indeed a typical and always up-to-date theme in printed fabrics for sofas, armchairs and cushions.

Hands with red nail polish on their fingers flicking through the colour chart of a fabric printer
The printing house’s colour shade chart

Colour shades are fundamental

Selecting colours for a printed fabric is more than just a matter of aesthetics. The rendering of the colours that digital printing produces must be perfect. After choosing the pattern and defining the design, we then move on to selecting all the shades on the colour chart of our trusted printing house.

Fabrics printed with flowers of different colours folded and arranged in a fan shape
Some colour variants of the flower print

One fabric for many colour patterns

The colour variations of a patterned print fill the eyes. In contrast to a plain colour, where we find a pleasant gradation of colours in the same fabric, in the case of a floral we seem to be looking at different fabrics. Light and dark greens, oranges and yellows, pinks, light blues and blues are just a few of the many nuances to be grasped.

Various floral and unfolded fabrics arranged on top of each other
Some combinations of even heterogeneous fabrics

Proposals for design combinations

One of our specialities is to offer collections of several articles together. Even a fabric with an important pattern – such as a floral pattern – doesn’t necessarily stand alone. On the contrary, it is from the interplay of upholstery and cushions that the most interesting aesthetic and design solutions emerge.

To find out which is your favourite among the designs already available or to develop a product tailored to your needs, contact us at your convenience: we are at your disposal.

 

 

 

How a sofa fabric is created

The process of creating a sofa fabric is undoubtedly one of the most exciting parts of our work. It involves the whole company and is a constant challenge to meet (and sometimes anticipate) our customers’ needs.

Let’s take a look together at the stages that transform an idea on the desk of the style office into an article available in the catalogues of retailers, in the showrooms of upholstery companies and in upholstery workshops.

Certainly the first suggestions come from the customers themselves. In a constant dialogue, our sales network listens, interprets and suggests what the market trends are and what new proposals need to be developed.

We listen to the market

Listening to the market is not only the first fundamental step, but it is a constant attention that accompanies all the phases of creation of the fabric; so that the creativity of the style office expresses itself at its best not only along paths of aesthetic and technical quality, but also on solid bases of commercial concreteness.

The first suggestions may come from the world of large-scale sofa production, from an Italian or foreign retailer, from a craftsman’s workshop, from an upholsterer: at this stage it is essential to listen.

Rocca di filato marrone
One of the many yarns available to the style office

Designing the fabric

Once the style office has identified the type of fabric that the market needs, the actual design phase begins: sometimes we start with articles already in the catalogue, for which a restyling is sufficient; sometimes we test new combinations of materials normally available in the warehouse; sometimes we experiment with new combinations of new yarns.

The most typical challenge is the creation of a completely new fabric, but made with yarns that are normally and historically part of our production.

Choosing the right yarns

Obviously, all stages in the creation of a fabric are important, but the yarn selection stage is perhaps the most delicate and complex. Choosing the right yarns means in fact satisfying at least three different needs:

  • aesthetic (we must obtain a fabric that is visually as we have designed it);
  • technical (during the production phase, first of the fabric and then of the sofa, we have to guarantee the workability and durability of the qualities);
  • commercial (we have to produce a fabric in line with the positioning of the market for which the fabric is intended)

To satisfy these three needs, there are many yarns available: cotton, linen, wool, viscose, polyester, acrylic and others.

We propose colour variants

Even the choice of the colour proposal is a phase in which it is evident how fundamental it is to reason by looking at the market to which one is addressing oneself. Like any other sector in the world of design, the furnishing fabrics sector is obviously characterised by fashion and seasonality.

The extra step we always strive to take, when proposing a colour range, is to pay attention first of all to the peculiarities of our customers, both in terms of territorial spread and style and market segment; and not only to the general trends of the sector.

Most articles have a wide range of colours, over twenty variants; and, where appropriate, characteristic and clearly recognisable textures or geometries.

Packaging samples

Once the design phase has been completed and the most suitable and effective colours have been chosen, the work moves on to production. The first prototypes of the new fabric are taken from the looms and it is checked that the fabric meets the quality standards both visually and to the touch.

Then it is the turn of the sample laboratory, which will give substance, with taste and precision, to the colour proposals; and will thus realise the colour ranges to be presented to customers – and which customers will present in turn.

Tessuti con colori neutri e fiore bianco
A detail of the newly created fabric

We listen to the market, again

We started by listening to our customers and their needs; the market focus has accompanied us through all stages of fabric creation; and of course the market will tell whether our fabric creation work has been done to perfection. Often a fabric is created and liked straight away; at other times there are small things to adjust – perhaps lighten it a little, or add an extra colour.

Our satisfaction is in seeing our customers satisfied, because we are convinced that the secret of the creation of a new fabric and its success lies in the collaboration between them and us.

Our style department is available for any clarification, support and product development for the projects you have in mind – or even to request a colour range of our latest fabrics – please contact us.

Lotus effect: nanotechnology for textiles

Nanotechnology is a high-tech process that makes it possible to apply naturally occurring qualities to materials. Thanks to this innovation we can obtain water-repellent fabrics.

It all began when the so-called lotus effect was discovered.

What is the lotus effect?

We have probably all seen the lotus flower at least in photographs: large petals, white to pink in colour, resting on large, flat, round green leaves; and on these leaves, large drops of water.

lotus flower
A lotus flower on the water of a pond

(Photo by Marina Logvin on Unsplash)

This flower grows in wet and muddy environments, real swamps, and you would expect to see leaves just as dirty and wet: however, the leaves of the lotus flower always remain dry and clean.

This is due to the special structure of the leaf surface. This is due to the special structure of the leaf surface. Apparently smooth, this surface actually has microscopic ripples that are invisible to the naked eye.

On surfaces with a normal structure, the water droplets adhere and then slide, allowing dirt to penetrate; on these tiny ripples, the water droplets do not slide, but roll, taking the dirt particles with them.

Nanotechnology fabrics: innovation and practicality

Once this extraordinary natural property has been discovered, nanotechnology enters the field. It allows this lotus effect to be imitated, resulting in water- and stain-repellent fabrics.

leaves with drops of water
The drops of water on the leaves of the lotus flower

(Photo by Julia Schwab on Pixabay)

Nanotechnology is not a superficial coating, but acts deep down at the molecular level, so the fabric retains all its natural characteristics: it is non-toxic, breathable, antistatic, resistant to both wet and dry cleaning, allows faster drying and is easy to clean with neutral products, thus avoiding the use of toxic and polluting chemical solvents.

The treatment is also permanent and maintains the quality of the colours and fabrics over time.

How to remove stains from a nanotechnology fabric

This technological innovation reveals itself in all its practicality when a liquid is spilled on a fabric.

Depending on the situation, it will be necessary to act in two ways:

  • If the liquid has remained on the surface: to remove the stains, dab lightly with a dry cloth or kitchen paper.
  • If dirt has penetrated due to strong pressure: lightly rub the stained area with a damp, non-abrasive sponge and rinse with a clean sponge.

For washing, use a small amount of neutral detergent and rinse thoroughly. When completely dry, iron at a medium temperature. In any case, just follow the instructions on the fabric label carefully.

Nanotechnology fabrics for sofas and armchairs

Sofas, armchairs and all upholstered furniture are obviously “natural targets” for staining liquids: wine, coffee, soft drinks, to name but a few. And so upholstery fabrics are the natural field of application for nanotechnologies that exploit the natural properties of the lotus effect.

bicchiere di vino rosso rovesciato
Red wine stains are very annoying

(Photo by Security on Pixabay)

The nanotechnological stain-resistant finish can be applied to any fabric, which will retain its natural characteristics and at the same time acquire water-repellent properties.

To find out more and learn more about all the properties of stain-resistant fabrics, please contact us.

Fabric colorfastness: quality that lasts

The dyeing process of our items ensures a perfect fabric colorfastness. For quality products that meet the needs of you and your customers.

The comfort of a removable cover

Those who buy a removable sofa certainly do so for the convenience of being able to put the cover in the washing machine. And machine washing is done not only to remove particular stains from time to time, but also to periodically refresh the covers and seat or back cushions, for example. So it’s critical to ensure the fabric colorfastness over time for that upholstery.

rotoli tessuto righe bianche e blu
Art. Fiesta e Trieste

The dyeing process

Sofas, armchairs and other upholstered furniture made from fabrics that have not been dyed properly can lead to unpleasant surprises: when the upholstery is put into the washing machine, it is faded, the color has lost its brilliance and uniformity – sometimes even after just one wash. In order to ensure that the fabric’s color holds up perfectly, every step of the dyeing process is important, so that the color penetrates deeply into the fibers and is firmly fixed.

dettaglio tessuto giallo
Art. Kinder

The characteristics of a good fabric

Fullness, uniformity, brightness, durability: these are the essential characteristics of the color, and that a good fabric must have and must maintain over time to be used in the production of sofas, armchairs and upholstered furniture quality. In order to obtain these characteristics, the dyeing process of Cartex Italia’s fabrics, in yarn or in piece, is entrusted to partners who have shown professionalism, reliability and timeliness over the years.

dettaglio tessuto damascato rosso
Art. Imperial

Quality products for satisfied customers

It is because of their and our experience that we can be sure to provide you with beautiful, solidly colored fabrics; and guarantee that they will remain so over time. So that you, in turn, can produce quality products to the complete satisfaction of your customers.

For more information, feel free to contact us – it will be a pleasure to speak with you.